News
The latest news and insider tips from Bristol Inkjet Ltd (BIL).We like to keep our customers updated with the latest developments in wide format printing. New products and exclusive deals. Tips on how to make the most of your Designjet printer. Our objective is to keep your Designjet printer working well, on the latest operating systems at low cost. We also rent and sell new and refurbished printers. We are excellent at it. We have repaired thousands of HP Designjet printers, and clocked up over 40 years of time working on them between our two main engineers.
News
The latest news and insider tips from Bristol Inkjet Ltd (BIL).
We like to keep our customers updated with the latest developments in wide format printing. New products and exclusive deals. Tips on how to make the most of your Designjet printer. Our objective is to keep your Designjet printer working well, on the latest operating systems at low cost. We also rent and sell new and refurbished printers. We are excellent at it. We have repaired thousands of HP Designjet printers, and clocked up over 40 years of time working on them between our two main engineers.
SE Code: 16.85:03 – Air Curtain burst resistor: Out of range.
SE Code: 16.85:03 – Air Curtain burst resistor: Out of range.Problem description: Air Curtain Resistors.Corrective action: ▲ Restart the printer. ▲ Reseat/Replace Air Curtain Resistors.If this doesn't solve the problem call or email one of our service engineers:...
SE Code: 16.84:03 – Air Curtain steady resistor: Out of range.
SE Code: 16.84:03 – Air Curtain steady resistor: Out of range.Problem description: Air Curtain Resistors.Corrective action: ▲ Restart the printer. ▲ Reseat/Replace Air Curtain Resistors.If this doesn't solve the problem call or email one of our service engineers:...
SE Code: 16.83:11 – Vapour burst resistor: Not connected.
SE Code: 16.83:11 – Vapour burst resistor: Not connected.Problem description: Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA Cables, Air Curtain Burst Resistor.Corrective action: ▲ Restart the printer. ENWW Continuable and non-continuable...
SE Code: 16.82:11 – Air Curtain steady resistor: Not connected.
SE Code: 16.82:11 – Air Curtain steady resistor: Not connected.Problem description: Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA Cables, Air Curtain Steady Resistor.Corrective action: ▲ Restart the printer. 1. Reseat/Replace Air Curtain...
SE Code: 16.61:10 – Vapour removal system: vapour fans array 1 fault.
SE Code: 16.61:10 – Vapour removal system: vapour fans array 1 fault.Problem description: Air Curtain and Printzone Heaters Control/Curing Control PCA (depending on SKU) to Air Curtain Fans, Cable Air Curtain Fans.Corrective action: ▲ Restart the printer. 1....
SE Code: 16.51:01 – Curing system: pressure not reachable. Printer is limiting working pressure.
SE Code: 16.51:01 – Curing system: pressure not reachable. Printer is limiting working pressure.Problem description: Silent SE. Customer symptoms are: slower through put, and/or lack of curing printer limiting working pressure. It might be due to: target pressure too...
SE Code: 16.50:10 – Severe SE: Pressure calibration failure together with NVM values = 0 (failure at first startup).
SE Code: 16.50:10 – Severe SE: Pressure calibration failure together with NVM values = 0 (failure at first startup).Problem description: Pressure calibration failure.Corrective action: ▲ Check the tube (not kinked), and sensor cable. If they are OK, replace the...
SE Code: 16.50:03 – Curing system: pressure calibration error.
SE Code: 16.50:03 – Curing system: pressure calibration error.Problem description: Silent SE: If there's already a valid pressure calibration in NVM, and new calibration values are out of range, then FW will use the NVM values and show a silent SE in the printer log...
SE Code: 16.44:10 – Curing system: module 4 failure.
SE Code: 16.44:10 – Curing system: module 4 failure.Problem description: ENWW Continuable and non-continuable error codes 99.Corrective action: ▲ Restart the printer.▲ Replace module 4.If this doesn't solve the problem call or email one of our service engineers:...
SE Code: 16.43:10 – Curing system: module 3 failure.
SE Code: 16.43:10 – Curing system: module 1 failure.Problem description: Curing resistor 3 disconnected or damaged.Corrective action: ▲ Restart the printer.▲ Replace module 3.If this doesn't solve the problem call or email one of our service engineers:...