SE Code: 16.83:11 – Vapour burst resistor: Not connected.

SE Code: 16.90:10 – Air Curtain: Temperature sensor failure or not connected.Problem description: Air Curtain and Printzone Heaters Control/Curing Control PCA...

SE Code: 16.85:03 – Air Curtain burst resistor: Out of range.Problem description: Air Curtain Resistors.Corrective action: ▲ Restart the printer. ▲...

SE Code: 16.84:03 – Air Curtain steady resistor: Out of range.Problem description: Air Curtain Resistors.Corrective action: ▲ Restart the printer. ▲...

SE Code: 16.82:11 – Air Curtain steady resistor: Not connected.Problem description: Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA...

SE Code: 16.61:10 – Vapour removal system: vapour fans array 1 fault.Problem description: Air Curtain and Printzone Heaters Control/Curing Control PCA...

SE Code: 16.51:01 – Curing system: pressure not reachable. Printer is limiting working pressure.Problem description: Silent SE. Customer symptoms are: slower...

SE Code: 16.50:10 – Severe SE: Pressure calibration failure together with NVM values = 0 (failure at first startup).Problem description: Pressure calibration...

SE Code: 16.50:03 – Curing system: pressure calibration error.Problem description: Silent SE: If there's already a valid pressure calibration in NVM, and new...

SE Code: 16.44:10 – Curing system: module 4 failure.Problem description: ENWW Continuable and non-continuable error codes 99.Corrective action: ▲ Restart the...

SE Code: 16.43:10 – Curing system: module 1 failure.Problem description: Curing resistor 3 disconnected or damaged.Corrective action: ▲ Restart the printer.▲...